Laser-Cut Metal Privacy Screens with Post Bases
We laser-cut decorative metal privacy screens and weld each panel into a square-tube frame with two posts and bolt-down base plates. The screen fixes to a patio slab or deck without digging post holes, and the posts are part of the panel — no separate post kit to match.
Patterns are cut on our flatbed fiber laser, frames are welded and every screen is finished in our factory in Dongyang, Zhejiang, China. The designs below are shown in black and grey. You can also send your own pattern or panel size.

Patterns we have made
Sizes are made to order — send yours with your inquiry.









What to choose
Pattern
Choose a pattern from this page or send a DXF, PDF or photo of the design you want.
Frame and posts
Square-tube frame with two posts and welded base plates, so the screen bolts straight down.
Material
Steel or aluminum — tell us which one you need.
Finish
Powder coated. Black and grey are shown here; ask for other colors.
Size
Panels are made to the width and height on your order.
Photos and illustrations



IllustrationBuying information
Standard designs
Minimum order 300 m (about 985 linear ft).
Custom designs
Built to your drawing from 5 m (about 16 linear ft).
Materials
Steel tube or aluminum tube — your choice.
Your drawing
Send a drawing, sketch with dimensions or a photo; we confirm the details with you before production.
Finish and color
Steel is powder coated in our own coating line. Tell us the color; for aluminum we confirm the finish with your quote.
To quote we need: the product and design, sizes (inches or mm), total length or number of panels, number of posts, corners and gates, steel or aluminum, color, and the delivery city or port. Drawings and photos help.
Installation notes
- Check that the slab or deck is level where the base plates will sit.
- Bolt the plates to concrete with anchors suited to your slab, or to deck framing (not just deck boards) with structural screws.
- A screen catches wind. On open, exposed sites ask your installer whether extra posts or in-ground footings are needed.
- Several screens can stand side by side as decorative metal fence panels along a patio edge.
Made in-house
Cut, welded and finished in our workshop
01Laser cutting
Screen patterns and plates cut on fiber lasers
02Welding
Frames, panels and posts welded in-house
03Powder coating
Parts hung on a conveyor line and powder coated
Frequently Asked Questions
Can you cut my own pattern?+
Yes. Send a DXF, AI or PDF file, or a photo of the pattern, together with the panel size. Custom patterns start from 5 m (about 16 linear ft).
Are the screens freestanding?+
Each screen has two posts with welded base plates, and the plates must be bolted down. Do not leave a screen standing loose — it can blow over.
Steel or aluminum — which should I choose?+
Both are available. Aluminum is lighter and does not rust; steel is heavier and stiffer. Tell us where the screens will stand and we will help you choose.
What is your minimum order quantity?+
Standard designs start from 300 m (about 985 linear ft) per order. Custom designs built to your drawing start from 5 m (about 16 linear ft). Tell us the total run length and the number of corners, ends and gates, and we will quote.
Request a quote for metal privacy screens
Tell us the design, sizes and quantity. Drawings and photos can be attached.
Related
Have a drawing or a railing run to price?
Standard designs from 300 m (about 985 linear ft); custom designs from 5 m (about 16 linear ft). Send your drawing, photos or sizes and we will come back to you with questions and a quote.