Railhurst

Aluminum and Steel Pool Fence Panels

Pool fence panels in aluminum or steel tube: vertical bars between top and bottom rails, welded in our workshop. Panels are built to the height and bar spacing you specify for your local pool barrier rules.

We make vertical-bar panels for dealers and pool contractors — standard designs from 300 m per order — and custom pool fencing to your drawing from 5 m.

Stack of vertical-bar metal fence panels in the workshop

What to choose

Material

Aluminum or steel tube; tell us the color you need.

Height and spacing

Built to the panel height and bar gap you give us.

Design

Vertical bars between top and bottom rails, as in the photos, or your own drawing.

Fixing

Tell us how the panels will be fixed on site; fixing details are agreed on your drawing.

Photos and illustrations

Vertical-bar fence panels stacked ready for the next process
Vertical-bar panels in production
Welding a vertical-bar fence panel on the workshop floor
Welding a vertical-bar panel

Buying information

Standard designs

Minimum order 300 m (about 985 linear ft).

Custom designs

Built to your drawing from 5 m (about 16 linear ft).

Materials

Steel tube or aluminum tube — your choice.

Your drawing

Send a drawing, sketch with dimensions or a photo; we confirm the details with you before production.

Finish and color

Steel is powder coated in our own coating line. Tell us the color; for aluminum we confirm the finish with your quote.

To quote we need: the product and design, sizes (inches or mm), total length or number of panels, number of posts, corners and gates, steel or aluminum, color, and the delivery city or port. Drawings and photos help.

Pool barrier guidance

  • US pool barrier rules commonly ask for a barrier at least 48 in high, openings that a 4 in sphere cannot pass, and only a small gap under the bottom rail.
  • Gates on pool barriers are usually required to be self-closing and self-latching and to open away from the pool, with the latch out of reach of small children.
  • Requirements vary by state, county and city. Check with your local building department and give us the dimensions it requires — we build to your drawing and do not certify compliance.

Made in-house

Cut, welded and finished in our workshop

  1. Flatbed fiber laser cutting sheet metal01

    Laser cutting

    Screen patterns and plates cut on fiber lasers

  2. Welders working on railing frames02

    Welding

    Frames, panels and posts welded in-house

  3. Powder coating booth with overhead conveyor03

    Powder coating

    Parts hung on a conveyor line and powder coated

Frequently Asked Questions

Aluminum or steel pool fence?+

Aluminum does not rust and is the usual choice around pools. Steel is stiffer and heavier.

Can your laser-cut screens be used as pool fence?+

Not usually. Decorative laser-cut patterns tend to have openings and footholds that pool barrier rules do not allow. Use vertical-bar panels around pools.

What is your minimum order quantity?+

Standard designs start from 300 m (about 985 linear ft) per order. Custom designs built to your drawing start from 5 m (about 16 linear ft). Tell us the total run length and the number of corners, ends and gates, and we will quote.

Request a quote for pool fence

Tell us the design, sizes and quantity. Drawings and photos can be attached.

Related

Have a drawing or a railing run to price?

Standard designs from 300 m (about 985 linear ft); custom designs from 5 m (about 16 linear ft). Send your drawing, photos or sizes and we will come back to you with questions and a quote.

Request a QuoteWhatsApp